TWO COMPONENT WATER BASED EPOXY COATING AND MOISTURE BARRIER
MULTI POXY 1928 is an epoxy floor coating with high build thickness with good chemical resistant properties which gives a tough but resilient floor coating, with reasonable colour stability. A flooring system able to provide appeal in semi-gloss colour and display good all-round abrasion and scuff resistance. High in water tolerance, it becomes an effective water barrier once cured. Available in a variety of colours and clear.
For use in commercial and industrial applications where high gloss and colour are required with seamless professional finishing. Used in car showrooms, offices, kitchens, laboratories, shopping areas, shop floors and domestic applications.
- Good colour stability
- Long lasting
- Seamless flooring
- Easy application
- Superb aesthetic
- High resistance to water and chemicals
- Easy to maintain
Colour on setting: Various
Overcoat Time: 12 hours
Walk on time: 24 hours
Application Thickness: 250-300 micron
Pot Life: 20 min
VOC: 140g/L Max
Compressive Strength: 45 MPa
Bond Strength: 1.5 N/mm2
Cleaning: Water while wet
Coverage: 8m² per litre
- Colours must be from the same batch to reduce risk of colour variations.
- Exposure of the coating to intense lighting or direct sunlight will produce discolouration in time.
DIRECTIONS FOR USE
Surfaces to be clean, sound and free of deleterious substances. Remove all laitance, oil, grease, paints, mould oil or curing compound from concrete surfaces using wire brush, bush hammer, scabbler or other plant as appropriate. Ensure that the substrate is flat and smooth, repairing any holes and dips to level finish. Use MULTI SELF–LEVELING screed if required. Friable screeds will have to be removed or re-screeded as necessary. Note any joints in order to follow through the epoxy screed where necessary.
Use MULTI POXY PRIMER or an initial coat of MULTI POXY 1928 to prime all substrates prior to final application of MULTI POXY 1928.
Using a festo mixer or other suitable mechanical mixer, mix the resin and hardener together in a clean bucket or metal drum. Pour out the entire contents over the primed areas and spread out steel trowel and roll with a mohair roller for 150–200 micron coatings. Use a steel trowel for 250 and greater micron coatings and allow to settle, sponge rolling out any trowel lines. Allow 24 hours before traffic.
All tools should be cleaned with water immediately after use. If delayed, use paint thinners. If epoxy has set hard, use mechanical action to clean or discard.
Supplied in 5L and 20L Resin + Hardener Kits
Multi Construction Chemicals South Africa (PTY) Ltd production and testing programs comply with all local and international testing standards.
The information supplied is believed to be reliable. As we do not have any control over the processing or application of the product we cannot guarantee the results to be obtained.
Users assume all risks and liability resulting from the use of this product and must confirm suitability thereof by conducting their own tests.
No guarantee is expressed or implied. Liability to the replacement of faulty material.
FOR PROFESSIONAL USE ONLY.