EPOXY_MULTI POXY 1942_Two Component Colour Epoxy Tile Grout - MCCSA
10150
page-template-default,page,page-id-10150,page-child,parent-pageid-7810,ajax_fade,page_not_loaded,,qode-theme-ver-3.10,wpb-js-composer js-comp-ver-6.1,vc_responsive
 

MULTI POXY 1942 

TWO COMPONENT COLOUR EPOXY TILE GROUT 
 

DESCRIPTION

MULTI POXY 1942 is an epoxy grout that is available in a variety of colours and is used primarily as a tile grout. Fine, hard fillers make the grout long lasting and can be used in damp areas. Water washable and smooth finishing. Sets at low temperatures and is resistant to moisture, UV light and has excellent chemical resistance. 

 

TYPICAL APPLICATIONS

For use in commercial and industrial applications where long lasting, water resistant, chemical resistant grouting is required. Used in showrooms, offices, kitchens, laboratories, pools, shopping areas, floors and domestic applications.  

 

ADVANTAGES

  • Good colour stability 
  • Long lasting 
  • Smooth finishing 
  • Water washable 
  • Easy application 
  • Superb aesthetic 
  • High resistance to water and chemicals 
  • Easy to maintain 
  • Non-cracking 
  • Variety of colours 

 

TYPICAL PROPERTIES

Yield: 1L 

Coverage: Grout fill dependant 

Application Temp: 10°C to 25 °C 

Grout Thickness: Unlimited 

Pot Life: 20 minutes 

Cure: Light Traffic: 24 hours 

Full Cure: 7 days  

Compressive Strength: 60MPa 

Bond Strength: 1,5 N/mm2 

Cleaning: Water

 

WATCH POINTS

  • Colours must be from the same batch to reduce risk of colour variations. 
  • Exposure of the coating to intense lighting or direct sunlight will produce discolouration in time. 
  • Staining of unsealed tiles may occur on direct, sustained contact. 

DIRECTIONS FOR USE

 

SURFACE PREPARATION

Surfaces to be clean, sound and free of deleterious substances. Remove all laitance, oil, grease, paints, mould oil or curing compound from surfaces using wire brush, bush hammer, scabbler or other plant as appropriate.  

 

PRIMING

No priming is required.  

 

APPLICATION

Mix the resin and hardener together in a clean bucket. Mix only enough to be able to grout within the pot life of the epoxy. Ensure all absorbent tiles are sealed or protected from direct contact with the epoxy grout as they may stain, even after cleaned off well. Allow 24 hours before light traffic. 

 

EQUIPMENT CARE

All tools should be cleaned with water immediately after use. If delayed, equipment will need thinners or mechanical action to clean or be discarded. 

 

PACKAGING

Supplied in 1L Resin + Hardener Kits 

 

QUALITY ASSURANCE

Multi Construction Chemicals South Africa (PTY) Ltd production and testing programs comply with all local and international testing standards. 

 

REVISION: 3.1

The information supplied is believed to be reliable. As we do not have any control over the processing or application of the product we cannot guarantee the results to be obtained.

Users assume all risks and liability resulting from the use of this product and must confirm suitability thereof by conducting their own tests.

No guarantee is expressed or implied. Liability to the replacement of faulty material.

FOR PROFESSIONAL USE ONLY.