EPOXY_MULTI POXY 1927_Two Component Epoxy Putty Adhesive - MCCSA
10142
page-template-default,page,page-id-10142,page-child,parent-pageid-7810,ajax_fade,page_not_loaded,,qode-theme-ver-3.10,wpb-js-composer js-comp-ver-6.1,vc_responsive
 

MULTI POXY 1927 

TWO COMPONENT EPOXY PUTTY ADHESIVE 
 
 
 

DESCRIPTION

MULTI POXY 1927 is a filled thixotropic solvent free epoxy putty with excellent gap filling properties and is used primarily as a tile adhesive. Fine, hard fillers make the adhesive long lasting and can be used in damp areas. Water washable and smooth finishing. Sets at low temperatures and is resistant to moisture, UV light and has excellent chemical resistance.   

 

TYPICAL APPLICATIONS

For use in commercial and industrial applications where long lasting, water resistant, chemical resistant adhesive is required. As a repair medium for damaged and spalled concrete. Ideal for repairing nosing on stairs and broken edges on columns. Bonding steel to steel, steel to concrete and rubber to concrete, and as an adhesive in difficult tiling situations and environments. Used in showrooms, offices, kitchens, laboratories, pools, shopping areas, floors and domestic applications.  

 

ADVANTAGES

  • No tile slip 
  • Long lasting 
  • Smooth finishing 
  • Water washable 
  • Easy application 
  • High bond strength 
  • High resistance to water and chemicals 
  • Moisture resistant  
  • Non-cracking 
  • Non-bleeding 

 

TYPICAL PROPERTIES

Yield: 1L 

Tiling Coverage: 1m2 per litre 

Application Temp: 10°C to 25 °C 

Thickness: Unlimited 

Pot Life: 20 minutes 

Cure (Light Traffic): 24 hours 

Full Cure: 7 days 

Compressive Strength: 80MPa 

Tensile Strength: 7 N/mm² 

Cleaning: Water 

 

WATCH POINTS

  • Clean all spills as soon as they occur. 
  • All standard precautions must be taken when tiling such as allowance for control and soft joints at regular intervals and around fixtures. 
  • Staining of unsealed tiles may occur on direct, sustained contact. 
  • Cure is retarded at low temperatures

DIRECTIONS FOR USE

 

SURFACE PREPARATION

Surfaces to be clean, sound and free of deleterious substances. Remove all laitance, oil, grease, paints, mould oil or curing compound from surfaces using wire brush, bush hammer, scabbler or other plant as appropriate.  

 

PRIMING

No priming is required. 

 

APPLICATION

Mix the resin and hardener together in a clean bucket. Mix only enough to be able to apply within the pot life of the epoxy. Ensure all absorbent tiles are sealed or protected from direct contact with the epoxy adhesive as they may stain, even after cleaned off well. Allow 24 hours before light traffic. 

 

EQUIPMENT CARE

All tools should be cleaned with water immediately after use. If delayed, equipment will need thinners or mechanical action to clean or be discarded. 

 

PACKAGING

Supplied in 1L, 2L and 5L Resin + Hardener Kits 

 

QUALITY ASSURANCE

Multi Construction Chemicals South Africa (PTY) Ltd production and testing programs comply with all local and international testing standards. MULTI EXPANSION TAPE jointing system shall be fastened in position to give continuous network with 100 mm minimum overlaps and installed in accordance with the manufacturer’s instructions.  

 

REVISION: 3.1

The information supplied is believed to be reliable. As we do not have any control over the processing or application of the product we cannot guarantee the results to be obtained.

Users assume all risks and liability resulting from the use of this product and must confirm suitability thereof by conducting their own tests.

No guarantee is expressed or implied. Liability to the replacement of faulty material.

FOR PROFESSIONAL USE ONLY.