EPOXY_MULTI POXY 1307 EPOSCREED_Three Component 6mm Epoxy Screed - MCCSA
10134
page-template-default,page,page-id-10134,page-child,parent-pageid-7810,ajax_fade,page_not_loaded,,qode-theme-ver-3.10,wpb-js-composer js-comp-ver-6.1,vc_responsive
 

MULTI POXY 1307 EPOSCREED 

THREE COMPONENT 6MM EPOXY SCREED 
  
 

DESCRIPTION

MULTI POXY 1307 EPOSCREED is a 6mm epoxy screed that is used primarily to fill and raise floor surfaces. Fine, hard fillers make the screed long lasting and can be used in damp areas. Water washable and smooth finishing. Sets at low temperatures and is resistant to moisture, UV light and has excellent chemical resistance.   

 

TYPICAL APPLICATIONS

For use in commercial and industrial flooring applications where long lasting, water resistant, chemical resistant screed is required. Used in showrooms, offices, kitchens, laboratories, pools, shopping areas, floors and domestic applications.  

 

ADVANTAGES

  • Hard wearing 
  • Long lasting 
  • Self-levelling 
  • Smooth finishing 
  • Water washable 
  • Easy application 
  • Superb aesthetic 
  • High resistance to water and chemicals 
  • Easy to maintain 
  • Non-cracking 
  • Variety of colours 

 

TYPICAL PROPERTIES

Yield: 12L 

Coverage: 2m2 @6mm thick 

Appearance: Clear amber screed 

Application Temp: 10°C to 25 °C 

Screed Thickness: Unlimited 

Pot Life: 20 minutes 

Overcoat Time: 8-12 hours 

Cure: Light Traffic: 24 hours 

Full Cure: 7 days 

Compressive Strength: 60MPa 

Bond Strength: 1,5 N/mm² 

Cleaning: Water

 

WATCH POINTS

  • Exposure of the screed to intense lighting or direct sunlight will produce discolouration in time. 
  • Do not hold a full kit in a bucket for more than 5 minutes, rather pour out onto floor and trowel out within the working time of the product.  
  • Screeds maybe textured if resin is not worked to the surface. 

DIRECTIONS FOR USE

 

SURFACE PREPARATION

Surfaces to be clean, sound and free of deleterious substances. Remove all laitance, oil, grease, paints, mould oil or curing compound from surfaces using wire brush, bush hammer, scabbler or other plant as appropriate.  

 

PRIMING

No priming is required. 

 

APPLICATION

Mix the resin and hardener together in a clean bucket and mix in the aggregate. Mix only enough to be able to screed out within the pot life of the epoxy. Trowel out using steel trowels. Back roll using a sponge roller to work resin to the surface for a smoother finish. Allow 8-12 hours before overcoating and 24 hours before light traffic. Overcoat with any solvent free epoxy-based coating such as MULTI POXY 1938 in colour of choice.  

 

EQUIPMENT CARE

All tools should be cleaned with water immediately after use. If delayed, equipment will need thinners or mechanical action to clean or be discarded. 

 

PACKAGING

Supplied in 4L Resin + 1.25L Hardener + 20kg Aggregate Kits 

 

QUALITY ASSURANCE

Multi Construction Chemicals South Africa (PTY) Ltd production and testing programs comply with all local and international testing standards. MULTI EXPANSION TAPE jointing system shall be fastened in position to give continuous network with 100 mm minimum overlaps and installed in accordance with the manufacturer’s instructions.  

 

REVISION: 3.1

The information supplied is believed to be reliable. As we do not have any control over the processing or application of the product we cannot guarantee the results to be obtained.

Users assume all risks and liability resulting from the use of this product and must confirm suitability thereof by conducting their own tests.

No guarantee is expressed or implied. Liability to the replacement of faulty material.

FOR PROFESSIONAL USE ONLY.