TWO COMPONENT CLEAR HI-BUILD EPOXY PRIMER
A colourless, clear deep-penetrating epoxy primer. Able to provide good adhesion to concrete, masonry, metal, wood, and ceramic surfaces. Cures to a clear, hard finish in 12 hours.
A general purpose, solvent free primer for epoxy screeds and coatings. As a clear primer that is resistant to yellowing, it will work well with clear topcoats. The quick drying times will allow application of topcoats within 8 hours.
- Deep penetrating into substrates
- Mutli purpose primer
- High build epoxy
- Low VOCs
- High gloss
- Easy application
- Moisture tolerant
- High resistance to water and chemicals
- High coverage
- Excellent adhesion to most substrates
- Aids in preventing rain and damp penetration
- Aids in preventing chloride intrusion
- Aids in protecting surface from discolouration and attacks in an acidified atmosphere
- Aids in preventing efflorescence
- Increases freeze I thaw resistance
Application Thickness: 100-200 micron
Mixing Ratio: 2 Resin, 1 Hardener
Pot Life: 20 Minutes
Application Temp: 5°C – 35°C
Coverage: 8 – 10m2 per litre
Bond Strength: 1.5 N/mm2
Compressive Strength: 80 MPa
Over-coat time: 8 hours
- Moisture content in the substrate must be below 12%.
- Exposure of the primer to intense lighting or direct sunlight will produce discolouration in time.
DIRECTIONS FOR USE
The surface to be treated should be dry and free of loose matter, moss, algae growth and curing compounds. Defective joints in brick and stonework should be repointed. It is not necessary to treat hair-line cracks, but large cracks should be made good and allowed to dry before treatment. Efflorescence should be removed from the surface by brushing. For maximum penetration smooth dense surfaces should be prepared by grit blasting, water blasting or by other mechanical means.
No priming required.
Using a mechanical mixer, mix the resin and hardener together in a clean bucket or metal drum. Pour out the entire contents over the areas to be primed and spread out with a mohair roller for 100 micron coatings or squeegee for thicker applications. Allow 8 hours before application of topcoats or screeds. After 24 hours, the primer may need a light sanding to generate a mechanical bond for topcoats or screeds.
Clean all equipment immediately after use with Multi Thinners 1600.
Supplied in 10L Resin and 5L Hardener
Multi Construction Chemicals South Africa (PTY) Ltd production and testing programs comply with all local and international testing standards. MULTI EXPANSION TAPE jointing system shall be fastened in position to give continuous network with 100 mm minimum overlaps and installed in accordance with the manufacturer’s instructions.
The information supplied is believed to be reliable. As we do not have any control over the processing or application of the product we cannot guarantee the results to be obtained.
Users assume all risks and liability resulting from the use of this product and must confirm suitability thereof by conducting their own tests.
No guarantee is expressed or implied. Liability to the replacement of faulty material.
FOR PROFESSIONAL USE ONLY.