SINGLE PACK SOLVENT ACRYLIC CONCRETE SEALER
DESCRIPTION
MULTI POLISH SEALER is a solvent acrylic resin sealer for use on aggregate exposed concrete floors where fast water and stain resistance with non-yellowing sealing is required. Fast setting with deep penetration, this sealer will adhere to all concrete surfaces.
TYPICAL APPLICATIONS
For sealing over indoor and outdoor surfaces where high-water resistance, stain resistance and UV stability is required. Suitable for sealing concrete floors where fast acting resistance is required without the need for cure times.
ADVANTAGES
- Ease of application
- Excellent coverage
- Instant seal
- High water resistance
- High stain resistance
- Moisture tolerant
- High shine
TYPICAL PROPERTIES
Yield: 5L and 25L
Coverage 1st coat: 10-12 m2 per litre
Coverage 2nd coat: 15 m2 per litre
Application Temperature: 10°C to 25 °C
Application: Roll on application
Finish: Satin to Gloss
Dry film Thickness: 40-50 micron
Overcoat Time:1-2 hours
Shelf Life: Keep in closed container
Traffic: Immediate
Cleaning: Thinners
WATCH POINTS
- Apply in well ventilated areas.
- Ensure rollers are dry before use
- Clean spills or splatters as soon as noticeable with thinners while the product is still liquid.
- Do not dilute with acetone, use only xylene.
DIRECTIONS FOR USE
SURFACE PREPARATION
Surfaces to be clean, sound and free of deleterious substances. Remove all laitance, oil, grease, paints, mould oil or curing compound from surfaces using wire brush, bush hammer, scabbler or other plant as appropriate. Previously coated surfaces will need to be stripped of the coatings if they are loose. Dense, sealed surfaces will need to be grinded open to create a mechanical profile.
PRIMING
No priming is required.
APPLICATION (POLISHING)
Roll out with a dry mohair roller, being careful to pick up roller lines and ends where these build up and allow to settle. Burnish or polish with a fine polish grinder or buffing pad depending on application use. Vacuum and damp (water) wipe between coats, allowing the surface to dry completely before proceeding. Two coats with polishing after each coat is recommended for optimum sealing and gloss formation. Once polished, the floor can be opened to traffic.
EQUIPMENT CARE
All tools should be cleaned with solvent thinners immediately after use.
PACKAGING
Supplied in 5L and 25L tins.
QUALITY ASSURANCE
Multi Construction Chemicals South Africa (PTY) Ltd production and testing programs comply with all local and international testing standards.
REVISION: 3.1
The information supplied is believed to be reliable. As we do not have any control over the processing or application of the product we cannot guarantee the results to be obtained.
Users assume all risks and liability resulting from the use of this product and must confirm suitability thereof by conducting their own tests.
No guarantee is expressed or implied. Liability to the replacement of faulty material.
FOR PROFESSIONAL USE ONLY.