CONCRETE REPAIR_MULTI SHOWROOM SEALER_Water Based Acrylic Polyurethane Sealer - MCCSA
10049
page-template-default,page,page-id-10049,page-child,parent-pageid-7810,ajax_fade,page_not_loaded,,qode-theme-ver-3.10,wpb-js-composer js-comp-ver-6.1,vc_responsive
 

MULTI SHOWROOM SEALER 

WATER BASED ACRYLIC POLYURETHANE SEALER 
 

DESCRIPTION

MULTI SHOWROOM SEALER is a water based acrylic polyurethane sealer for use on walls and floors where fast chemical resistance, flexibility, stain resistance and non-yellowing sealing is required. Satin gloss clear coating, this sealer will adhere to all concrete, brick, tiles, and previously coated surfaces.  

 

TYPICAL APPLICATIONS

For sealing over indoor and outdoor surfaces where flexible water resistance, chemical resistance and UV stability is required. Suitable for sealing floors where stain and water resistance are required with a clear, satin gloss.  

 

ADVANTAGES

  • Ease of application 
  • Excellent coverage 
  • Early hard set 
  • High chemical resistance 
  • Easy to clean  
  • High stain resistance 
  • Moisture tolerant 
  • Single pack application 

 

TYPICAL PROPERTIES

Yield: 5L kits 

Coverage 1st coat: 8-10 m2 per litre 

Coverage 2nd coat: 15 m2 per litre

Application Temperature: 10°C to 25 °C

Application: Roll on application 

Finish: Satin 

Dry film Thickness: 60-80 Showroom 

Overcoat Time: 1-2 hours 

Shelf Life: Keep in closed container 

Traffic: 4 hours 

Cleaning: Water 

 

WATCH POINTS

  • Apply in well ventilated areas. 
  • Do not expose the coated surface to moisture for 4 hours after application. 
  • Ensure rollers are dry before use. 
  • Clean spills or splatters as soon as noticeable with water while the product is still liquid. 
  • Dilute with water if required. 

DIRECTIONS FOR USE

 

SURFACE PREPARATION

Surfaces to be clean, sound and free of deleterious substances. Remove all laitance, oil, grease, paints, mould oil or curing compound from surfaces using wire brush, bush hammer, scabbler or other plant as appropriate. Previously coated surfaces will need to be stripped if the coating is loose. Dense, sealed surfaces will need to be grinded open to create a mechanical profile.

 

PRIMING

No priming is required.  

 

APPLICATION

Roll out with a dry mohair roller, being careful to pick up roller lines and ends where these build up and allow to settle. Allow 1-2 hours between coats. Two coats are recommended for optimum sealing and protection if surfaces are very porous. Allow 4 hours without exposure to surface moisture to prevent discolouration then open to traffic. 

 

EQUIPMENT CARE

All tools should be cleaned with water immediately after use. If delayed, equipment will need mechanical action to clean or be discarded. 

 

PACKAGING

Supplied in 5L polycan. 

 

QUALITY ASSURANCE

Multi Construction Chemicals South Africa (PTY) Ltd production and testing programs comply with all local and international testing standards. 

 

REVISION: 3.1 

The information supplied is believed to be reliable. As we do not have any control over the processing or application of the product we cannot guarantee the results to be obtained.

Users assume all risks and liability resulting from the use of this product and must confirm suitability thereof by conducting their own tests.

No guarantee is expressed or implied. Liability to the replacement of faulty material.

FOR PROFESSIONAL USE ONLY.

DOWNLOAD PDF
CONTACT US FOR MORE INFORMATION