Multi Bit 1702

Description

MULTI BIT 1702 is a thixotropic rubberized bitumen emulsion dries to provide a tough, seamless, flexible waterproof and vapour proof membrane coating. It forms a dark, thick coating that key directly onto cementitious and brick surfaces.

Typical Applications

An economic system for the sealing and waterproofing of tanks, retaining walls*, reservoirs and pools*, floors and roofs, balconies*, prestressed concrete slabs**

* Use with MULTI POLYESTER FIBRE MEMBRANE for maximum protection

** used as a concrete surface bed joint bond breaker

Advantages

• Earlier hardening and greatly improved flexibility
• Fast Setting
• Hard surface
• Good adhesion to concrete
• Easy application
• Resistant to chemicals and sulphates
• Water based

Typical Properties

Watch Points

• Wash equipment immediately after use with water

Directions for Use

Surface Preparation:

Surfaces are to be clean, sound, and free of deleterious substances. Remove all laitance, oil, grease, mould oil or curing compound from concrete surfaces using wire brush, bush hammer, scabbler or other plant as appropriate. When repairing damaged concrete, ensure that all loose concrete has removed down to a firm base. Repair with MULTI PLAST 1038 or MULTI GROUT CEM 60. Surfaces can be damp but not wet.

Priming:

No priming is required

Application:

Apply with a sprayer or block brush or at a rate of 0.5mm thickness. Inset MULTI POLYESTER FIBRE MEMBRANE (if required). Allow to cure for 24 hours between coats. Apply a second coat. Target thickness is 1mm.

Equipment Care

Clean all equipment immediately after use with water. If delayed, use of MULTI THINNERS may be necessary.

Packing

Supplied in 5Lt and 25LT polycans

Quality Assurance

Multi Construction Chemicals South Africa (PTY) Ltd production and testing programs comply with all local and international testing standards.

REVISION: 3.1